manualshive.com logo in svg

Xylem WTW Multi 9430, Operating Manual

Share
Download
Xylem WTW Multi 9430 Operating Manual Download Page 11

Multi 9430

Safety

ba75966e04

04/2015

11

Only the operation and running of the meter according to the instructions and 
technical specifications given in this operating manual is authorized (see 
section 14 T

ECHNICAL

 

DATA

, page 120).

Any other use is considered unauthorized.

2.2.2 Requirements for safe operation

Note the following points for safe operation:
• The meter may only be operated according to the authorized use specified 

above.

• The meter may only be supplied with power by the energy sources 

mentioned in this operating manual.

• The meter may only be operated under the environmental conditions 

mentioned in this operating manual.

• The meter may not be opened.

2.2.3 Unauthorized use

The meter must not be put into operation if:
• it is visibly damaged (e.g. after being transported)
• it was stored under adverse conditions for a lengthy period of time (storing 

conditions, see section 14 T

ECHNICAL

 

DATA

, page 120).

Summary of Contents for WTW Multi 9430





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands