Commissioning
Alyza IQ PO4
30
ba76201d03
05/2020
3.3.4 Installing the housing
The housing of the Alyza IQ can be installed in the following ways:
On the SM stand mount (see section 3.3.5 Installation on the SM stand
mount,
30).
On a rail (see section 3.3.6 Installation on a rail,
On a wall (see section 3.3.7 Installation on a wall,
3.3.5 Installation on the SM stand mount
Proceed as follows to install the housing on the stand mount:
Assembling the
stand mount
In the housing there is a foam insert serving as a transport protec-
tion. Remove the foam insert once the installation of the housing
has been completed.
figure 3-1 Mounting the ground pipes
1
Protective plug
2
Square ground pipe
3
Stand foot
1
Press the plastic protective plugs (1) into both ends of the square
ground pipes (2).
1
2
(2
x
)
3
Summary of Contents for WTW Alyza IQ PO4
Page 171: ......
