99
2.7.4
Initial Filling or Rinsing of the Entire Interchangeable Unit
While the initial filling or rinsing programme is being run, please place a sufficiently dimensioned waste
vessel under the titration tip.
Initial filling of the interchangeable unit is done using the «
rinsing
» program.
Fig. 19
On the main menu (Fig. 19), press <
MODE
> to navigate to the methods/system (Fig. 20).
Fig. 20
Pressing <
↑> twice will take you to the «
Rinsing
» selection immediately (Fig. 21).
Fig. 21
Confirm the selection by pressing <
ENTER
>/<
OK
>.
At this point you can select the number of rinsing cycles (Fig. 22).
