Xylem MJK Chatter, Hardware Installation User Manual

Page: 11 / 50

Analog Inputs
( 2 )
Chatter

hasfouranaloginputseachwitharangeof0,1-2,5VDC(seeposi-
tion“2”onthedrawingtotheleft) .
Analog inputs
Terminal Designation/function
AI1 0 .1-2 .5VDC
AI2 0 .1-2 .5VDC
AI3 0 .1-2 .5VDC
AI4 0 .1-2 .5VDC
GND CommonGNDterminalforAI1-4
Table5 .AnalogInputs
USB Connector ( 3 )
ChatterisequippedwithaUSBsocketforcommunicationwithforexamplea
laptopcomputerforconfiguration .
Voltage Outputs ( 4 )
ChatterhasthreevoltageoutputsforMJK-approvedequipment:onefrom
thefactoryprogrammable5/10/15VDCsupplyandtwoseparate3 .6VDC
outputs .
Voltage Outputs
Terminal Designation/function
+5/10/15VDC Programmable,ON/OFF-controlledvoltagesupply(+5VDCfromfactory)
GND Ground
3V6-A 3 .6volt(alwaysON)
GND Ground
3V6-B 3 .6volt(ON/OFF-controlledbytheelectronicsduringmeasurement)
GND Ground
Table6 .VoltageOutputsforMJK-approvedEquipment
Theoutputs”5/10/15”and”3V6-B”arecontrolledinsuchawaythattheyare
activatedduringmeasurement .”3V6-A”isconnecteddirectlytothebattery
andisassuchalwaysactive .
4 .ElectricalConnections
Data Logger
11