7
Weight
Micro 10 1300 mm 130 Kg
Micro 10 2000 mm DN 50 150 Kg
Micro 10 2000 mm DN 65 210 Kg
Riser 350 mm 23 Kg
Total weight without pumps
Volume of tank (litres)
Micro 10 1300 mm 1200 L
Micro 10 2,000 mm 1900 L
Pump
DN50 DN 65
Refer to pump installation manual
Fuse box
Refer to instructions supplied with this equipment.
TECHNICAL CHARACTERISTICS
Applications
The Micro 10 is delivered completely assem-
bled and ready to be put into service.
This pumping station is intended for pumping
raw sewage, black water with or without par-
ticles or fecal matter (bathroom and toilet fa-
cilities, WC, showers, kitchens), water
loaded with fabric, fibres or straw, slops,
rainwater or wastewater, discharged by:
Individual dwelling Collective dwelling
Housing development Campsite Hotel
Muncipal showers Restaurant kitchen
Sports complexes Milking parlour
Livestock pen Abattoir
Equipment
The pumping station is delivered already
equipped with the following items:
1. Cover
2. Internal gates and tubing
3. Pump glands
4. Inlet gasket
Important
Pumps, fuse box, levels controllers, chains
and shackles are delivered separately.
Temperature of pumped liquid:
35°C Max.
Depth of excavation:
2.7 m Max.
External constraints
The pumping station is designed for a water
table which may reach ground level. The
pumping station must be installed in such a
way that loads caused by vehicular traffic are
not felt less than 1.0 metre from the edge of
the pumping station.
Tank and cover materials
The Micro 10 tank is manufactured from ro-
tationally-molded polyethylene .
Guide bar materials
A2 Stainless Steel
Pipework materials
PVC DN 50 or DN 65 discharge pipes
Inlet to be drilled for pipe Ø 160(mm) ext.
The pumping station is not
intended for use in an
explosive environment or
for inflammable liquids
