en – Original instructions
60
e-IXP(A), e-IXPC(A), e-IXPF(A) – Additional Installation, Operation and Maintenance Manual
10.2
Pump
EC Declaration of Conformity (Original)
Xylem Service Italia S.r.l., with headquarters at Via Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy,
hereby declares that the product:
Pump with free shaft end without drive (see the label on the front page of the Additional
Installation, Operation and Maintenance Instructions)
fulfils the relevant regulations of the following European Directives:
•
“Machinery guideline” 2006/42/EC and subsequent amendments (ANNEX II - natural or
legal person authorised to compile the technical file:
Xylem Water Solutions Austria GmbH, Ernst Vogel-Strasse 2 - 2000 Stockerau - Austria)
•
“Eco-design” 2009/125/EC and subsequent amendments, Regulation (EU) No. 547/2012
and subsequent amendments (water pump, if MEI marked) and the technical standards:
−
EN 809: 2012
−
EN ISO 12100:2010
−
EN ISO 14120:2015
A modification on the pump which is not approved by Xylem Inc. invalidates this declaration.
Montecchio Maggiore, 17/02/2022
Marco Ferretti
(Operation Director & Site Leader)
rev.00
EU Declaration of Conformity (n. 67)
1.
ATEX - Product model/product: IXP..A.. (see the label on first page)
2.
Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy
3.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
4.
Object of the declaration:
ATEX
Pump: II 2G Ex h IIC T5...T3 Gc
-20°C≤ Tamb ≤+40…50°C see the pump Atex data plate
5.
The object of the declaration described above is in conformity with the relevant Union
harmonization legislation:
2014/34/EU Directive of 26 February 2014 and subsequent amendments (equipment
intended for use in potentially explosive atmospheres).
6.
References to the relevant harmonized standards used or references to the other technical
specifications, in relation to which conformity is declared:
Pump: EN 1127-1:2019, EN 15198: 2007, EN ISO 80079-36:2016, EN ISO 80079-37:2016.
7.
Notified body:
ATEX
Pump:technical documentation (file name IXP ATEX rev. 0 of
18.01.2022) deposited at Intertek Italia S.p.A. (NB 2575).
Receipt number: ITS-I 32053
8.
Additional information:
ATEX The following specific conditions of use apply.
– The equipment must be suitably grounded (earthed) prior to
operation.
– It is the user’s responsibility to ensure the equipment does not
run dry. Any control system used to achieve this must comply
with the relevant requirements of EN 80079-37.
– The equipment may only be operated when it is filled with the
