Xylem LOWARA Aquavara IPC, Quick Start Manual, Page: 29 / 292

Start-Up Genie Complete
Press [OK] to Exit
8. Programming Completed. Select OK to Exit from
Start-up Genie.
3.3.3 Multi-pump Multicontrol
This example is for four pumps, constant pressure control.
Starting from the first inverter to the last, configure each inverter with same parameters values.
Multi-pump Control
Multi Master MulCtl
1. Select Multipump operation from the list below.
Refer to the full manual for details.
• Fixed Speed Follower
• Multi Master Synch
• Multi Master MulCtl
Pump Address
1
2. Select Pump Multi-pump address from 1 to 4.
Application Type
Constant Pressure
3. Selectable applications are Constant Pressure,
Flow Control and Level Control. Refer to the full man-
ual for details.
Pressure Control Units
bar
4. Select Pressure Control Unit.
Ramp Time
Fast
5. Select Ramp Time. Refer to Ramp Control descrip-
tion for details.
Regulation Band
20%
6. Set desired pressure regulation band for Double
Ramp Control Logic. Refer to Ramp Control descrip-
tion for details.
Number of Pumps
2
7. Select Number of Pumps, from two to four.
Number of standby pumps
0
8. Select Number of Standby Pumps.
Would you like to Autoset
the rest of the settings?
Yes
9. Select Yes to Autoset the rest of the settings. Refer
to Autoset Parameters Extract for details.
en - Original instructions
29