1 Introduction and Safety
1.1 Introduction
Purpose of this manual
The purpose of this manual is to provide necessary information for:
• Installation
• Operation
• Maintenance
CAUTION:
Read this manual carefully before installing and using the
product. Improper use of the product can cause personal in-
jury and damage to property, and may void the warranty.
NOTICE:
Save this manual for future reference, and keep it readily available at
the location of the unit.
1.2 Inexperienced users
WARNING:
This product is intended to be operated by qualified person-
nel only.
Be aware of the following precautions:
• Persons with diminished capacities should not operate the prod-
uct unless they are supervised or have been properly trained by a
professional.
• Children must be supervised to ensure that they do not play on or
around the product.
1.3 Safety terminology and symbols
Hazard levels
H
Hazard level
Indication
DANGER:
A hazardous situation which, if not
avoided, will result in death or se-
rious injury
WARNING:
A hazardous situation which, if not
avoided, could result in death or
serious injury
CAUTION:
A hazardous situation which, if not
avoided, could result in minor or
moderate injury
NOTICE:
• A potential situation which, if
not avoided, could result in
undesirable conditions
• A practice not related to per-
sonal injury
Hazard categories
Hazard categories can either fall under hazard levels or let specific sym-
bols replace the ordinary hazard level symbols.
Electrical hazards are indicated by the following specific symbol:
Electrical Hazard:
Hot surface hazard
Hot surface hazards are indicated by a specific symbol that replaces the
typical hazard level symbols:
CAUTION:
Description of user and installer symbols
Specific information for personnel in charge of installing
the product in the system (plumbing and/or electrical
aspects) or in charge of maintenance.
Specific information for users of the product.
1.4 Spare parts
WARNING:
Only use original spare parts to replace any worn or faulty
components. The use of unsuitable spare parts may cause
malfunctions, damage, and injuries as well as void the guar-
antee.
For more information about the product's spare parts, refer to the Sales
and Service department.
2 Transportation and Storage
2.1 Inspect the delivery
1.
Check the outside of the package.
2.
Notify our distributor within eight days of the delivery date, if the
product bears visible signs of damage.
3.
Remove the staples and open the carton.
4.
Remove the securing screws or the straps from the wooden base
(if any).
5.
Remove packing materials from the product. Dispose of all pack-
ing materials in accordance with local regulations.
6.
Inspect the product to determine if any parts have been damaged
or are missing.
7.
Contact the seller if anything is out of order.
2.2 Transportation guidelines
Precautions
WARNING:
• Observe accident prevention regulations in force.
• Crush hazard. The unit and the components can be
heavy. Use proper lifting methods and wear steel-toed
shoes at all times.
Check the gross weight that is indicated on the package in order to se-
lect proper lifting equipment.
Position and fastening
The unit can be transported either horizontally or vertically. Make sure
that the unit is securely fastened during transportation, and cannot roll
or fall over.
1 Introduction and Safety
2
Model e-HM Installation, Operation, and Maintenance Manual
