Figure 8
e-580 pumps have a four bolt circle on the bottom of the volute to accept an ANSI/ASME
flange that can be used with a connected pipe as a temporary pump support while the
permanent pump piping or pump supports are being fitted to the pump. This support can
only be used to handle the pump weight as it is not suitable resist loads in other
directions.
Figure 9
For installations in grooved piping systems when the pump is supported by the piping,
flange locking type grooved piping connections are required to prevent the pump from
rotating in the piping.
4 Installation
Marlow Series e-580 INSTRUCTION MANUAL
15
Summary of Contents for Goulds e-580-F
Page 1: ...INSTRUCTION MANUAL P2002885 Rev B Marlow Series e 580 ...
Page 2: ......
Page 30: ......
Page 31: ......