background image

2  Transportation and Storage

2.1  Examine the delivery

2.1.1  Examine the package

1. Examine the package for damaged or missing items upon delivery.
2. Record any damaged or missing items on the receipt and freight bill.
3. If anything is out of order, then file a claim with the shipping company.

If the product has been picked up at a distributor, make a claim directly to the
distributor.

2.1.2  Examine the unit

1. Remove packing materials from the product.

Dispose of all packing materials in accordance with local regulations.

2. To determine whether any parts have been damaged or are missing, examine the

product.

3. If applicable, unfasten the product by removing any screws, bolts, or straps.

Use care around nails and straps.

4. If there is any issue, then contact a sales representative.

2.2  Transportation guidelines

2.2.1  Lifting methods

WARNING:

• Assembled units and their components are heavy. Failure to properly lift and support

this equipment can result in serious physical injury and/or equipment damage. Lift
equipment only at the specifically identified lifting points. Lifting devices such as
eyebolts, slings, and spreaders must be rated, selected, and used for the entire load
being lifted.

• Crush hazard. The unit and the components can be heavy. Use proper lifting methods

and wear steel-toed shoes at all times.

2.3  Storage guidelines

Storage location

The product must be stored in a covered and dry location free from heat, dirt, and
vibrations.

NOTICE:

Protect the product against humidity, heat sources, and mechanical damage.

NOTICE:

Do not place heavy weights on the packed product.

2.3.1  Long-term storage

If the unit is stored for more than 6 months, these requirements apply:

• Store in a covered and dry location.
• Store the unit free from heat, dirt, and vibrations.
• Rotate the pump shaft by hand several times at least every three months.

2  Transportation and Storage

6

AquaBoost Advanced Pumping Packages INSTRUCTION MANUAL

Summary of Contents for Goulds AquaBoost Advanced





































Reviews: