background image

1  Introduction and Safety

1.1  Introduction

Purpose of the manual

The purpose of this manual is to provide necessary information for installation, operation,
and maintenance of the unit.

Read and keep the manual

Save this manual for future reference, and keep it readily available at the location of the
unit.

CAUTION:

Read this manual carefully before installing and using the product. Improper use of the
product can cause personal injury and damage to property, and may void the warranty.

The equipment, and its functioning, may be impaired if used in a manner not specified by
the manufacturer.

Intended use

WARNING:

Operating, installing, or maintaining the unit in any way that is not covered in this manual
could cause death, serious personal injury, or damage to the equipment and the
surroundings. This includes any modification to the equipment or use of parts not
provided by Xylem. If there is a question regarding the intended use of the equipment,
please contact a Xylem representative before proceeding.

1.2  Safety terminology and symbols

About safety messages

It is extremely important that you read, understand, and follow the safety messages and
regulations carefully before handling the product. They are published to help prevent
these hazards:

• Personal accidents and health problems
• Damage to the product and its surroundings
• Product malfunction

Hazard levels

Hazard level

Indication

DANGER:

 

A hazardous situation which, if not avoided, will result in

death or serious injury

WARNING:

 

A hazardous situation which, if not avoided, could result

in death or serious injury

CAUTION:

 

A hazardous situation which, if not avoided, could result

in minor or moderate injury

1  Introduction and Safety

2

MRM 01 Installation, Operation, and Maintenance Manual

Summary of Contents for FLYGT MRM 01





















Reviews: