Purpose of this manual
The purpose of this manual is to provide necessary information for product installation,
operation and maintenance.
CAUTION: Read this manual carefully before installing, using or servicing
this product. Failure to follow the instructions within this manual could result
in explosion, property damage, severe personal injury and/or death.
DANGER: Failure to follow this instruction manual may lead to significant
property damage or may result in serious injury or death.
About safety messages
It is extremely important that you read, understand and follow the safety messages and
regulations carefully before handling the product. They are published to help prevent
these hazards:
WARNING:
•
The operator must be aware of safety precautions to prevent physical
injury.
•
Operating, installing or maintaining the unit in any way that is not
covered in this manual could cause death, serious personal injury
or damage to the equipment. This includes any modification to
the equipment or use of parts not provided by Xylem. If there is a
question regarding the intended use of equipment, please contact a
Xylem representative before proceeding.
•
Do not change the service application without the approval of an
authorized Xylem representative.
•
Personal accidents and health problems
•
Damage to the product
•
Product malfunction
NOTICE: Save this manual for future reference, and keep it readily available
at the location of the unit.
Safety
Safety terminology and symbols
Hazard Level:
DANGER
WARNING
CAUTION
NOTICE
Indication:
A hazardous situation which, if not avoided, will result in death or serious injury.
A hazardous situation which, if not avoided, could result in death or serious injury.
A hazardous situation which, if not avoided, could result in minor or moderate injury.
A potential situation which, if not avoided, could result in undesirable conditions.
A practice not related to personal injury.
ELECTRICAL HAZARD:
Hazard categories can either fall under hazard levels or let specific symbols replace
the ordinary hazard levels symbols. Electrical hazards are indicated by the following
specific symbols:
These are examples of other categories that can occur. They fall under the
ordinary hazard levels and may use complementing symbols:
Hazard categories
•
Crush hazard
•
Cutting hazard
•
Arc flash hazard
General safety rules
These are safety rules apply:
•
Always keep work area clean
•
Pay attention to the risks presented by gas and vapors in the work area.
•
Avoid all electrical dangers. Pay attention to the risks of electric shock or arc flash
hazards
•
Always bear in mind the risk of drowning, electrical accidents and burn
injuries
User safety
Safety equipment
Use safety equipment according to the company regulations. Use this safety equipment
within the work area:
Electrical connections
Electrical connections must be made by certified electricians in compliance with
all international, national, state and local regulations. For more information about
requirements, see sections dealing specifically with electrical connections.
•
Hard hat
•
Safety goggles, preferably with side shields
•
Protective shoes
•
Protective gloves
•
Gas mask
•
Hearing protection
•
First-aid kit
•
Safety devices
NOTICE: Never operate a unit unless safety devices are installed.
2
Automatic Diaphragm
System Pump
Summary of Contents for FLOJET R4320143A
Page 37: ......
