Xycom XVME 590, Manual

Page: 40 / 102

XVME-500/590 Manual
February, 1988
Table 2-13. P2’s - JKI Compatibility Pin-out (Cont’d)
Flat Cable
Conductor Single-Ended
Configuration
46 CH. 31
47 CH. 23
48 ANALOG GND
49 POWER GND/PD GND
50 EXT TRIGGER
Differential
Configuration P 2
onnector
CH. 15 HI A23
CH. 15 LO
C24
ANALOG GND A 2 4
POWER GND/PD GN C25
EXT TRIGGER A25
2.8 JUMPER LIST
The following table summarizes all the XVME-500/590 jumpers and their functions.
Jumper Description
JlA
JlB
J2A
J2B
J3A
J3B
J4A
J4B
J5A
J5B
J 6
J 7
J8
J9
Jl0
Jll
J 1 2
J 1 3
J14
J 1 5
J 1 6
J 1 8
J19
J20
J 1 7
J21A
J2lB
J21C
J21D
.
Analog-to-binary conversion with J4A
Analog-to-two’s complement conversion with J4B
Allows 12-bit resolution in ADC conversions
Allows 8-bit resolution in ADC conversions
Voltage range selector to ADC; 0-l0V,
Voltage range selector to ADC; +l0V
Analog-to-binary conversion with J1A
Analog-to-two’s complement conversion with J1B
Unipolar voltage range selector
Bipolar voltage range selector
Fixed gain selector (x1000)
Resistor programmable gain selector
Fixed gain selector (x100)
Fixed gain selector (x10)
A3 interrupt level selector
A2 interrupt level selector
Al interrupt level selector
IN = supervisory only; OUT = supervisory or non-privileged
Programmable gain range selector; Range 2 (4, 8, 20, 40)
Programmable gain range selector; Range 1 (1, 2, 5, 10)
Programmable gain range selector; Range 3 (10, 20, 50, 100)
Programmable gain range selector (accompanies J14)
Programmable gain range selector (accompanies J15)
Programmable gain range selector (accompanies J16)
External trigger selector (remove J21A-D;do not use with PDI)
Configures module for SE operation;accompanies J25 & J21C or D
Configures module for DI operation
Configures module for SE operation with J21A & J25
Configures module for PDI operation with J21A & J25
Table 2-14. XVME-500/590 Jumper List
2-24