Xycom XVME-202, Manual

Page: 11 / 40

XVME-202 Manual
December, 1986
2.4 XVME-202 MODULE JUMPER LIST
Table 2-1. Module Jumper List
JUMPER
JlA
JlB
J2
USE
Selects optional on-board oscillator.
Selects SYSCLK from VMEbus.
Determines whether the module will respond to supervisory
or non-privileged short I/O VMEbus cycles (refer to section
2.4.2 of this manual).
JAl0-JAI5 Select module base address on any one of the 64 1K boundaries
within the short I/O address space (refer to Section 2.4.1 of
this manual).
2.4.1 Base Address Jumpers
The XVME-202 can be configured to be addressed at any one of the 64
1K
boundaries within the VME Short I/O Address space by using jumpers JAl0
through
JA15 (see Figure 2-1 for the location of the jumpers on the board) as shown
in
Table 2-2.
2-3