XCPC-9200
4
Chapter 1 General Description
The XCPC-9200 is the most advanced CompactPCI (cPCI) carrier in the market that offers
two IEEE.1-2201-compliant conduction-cooled PMC sites with 25 watts of power to each
site.
Conduction-cooled module that is also available as an air cooled module.
High current/wattage power supply to deliver up to 25 watts of power to each
PMC site.
64/32-bit, 133/66/33MHz PCI bus on the CompactPCI bus. The PMC side
supports 64/32-bit operation at 133MHz or 66MHz speeds (user selectable).
It supports the interrupts INTA, INTB, INTC, and INTD.
CompactPCI I/O signaling is auto-configured and supports both 3.3V and 5V
backplanes. The PMC interfaces support 3.3V I/O signaling only.
The PMC connectors on the carrier include all the signals of a 66/33 MHz,
64/32-bit, multi-master PCI bus, the power rails for 3.3V, 5V, V(I/O) and other
specialized signals for board detection.
Each PMC site provides full rear I/O capability through its J14/J24 connector.
The rear I/O is routed through the J3 and J5 connectors on the backplane.
A PCI-to-PCI bridge provides for coupling of the PMC sites to the
CompactPCI backplane, so that two independent PCI busses exist. The
CompactPCI interface is the PLX PCI6540 PCI-to-PCI bridge. It is software
transparent and consequently a software driver is not required to manage
data transfer between the PMC module and the CompactPCI bus.
The XCPC-9200 has been designed to function with all CompactPCI
backplanes.
The J4 connector is not present on the XCPC_9200 so this carrier module
can also be used in systems employing an H110 backplane.
