5015SLR Flat Panel Industrial Touch Monitor Chapter 3 – Monitor Settings
23
144812(D)
Light Enable
Off
On
Light Contrast
72
Light Bright
50
Light H Start
24
Light H Width
50
Light V Start
25
Light V Height
50
Note: This feature only exists on the black bezel units.
Recall the Factory Default Settings
Follow these steps to reset the factory default settings for the OSD.
1. Navigate to the
menu and highlight
Recall
.
2. Press RIGHT to choose
yes.
3. Press AUTO to reach the Main Menu then press AUTO again to exit the
OSD.
Analog RGB Interface Specifications
Analog RGB interface specifications include the following :
•
Based on VESA standard, separate analog RGB
•
Input range: 0.5 to 1.0Vp-p typical with terminal resistance of 75
Ω
•
H sync signal input: TTL level, negative true or positive true
•
V sync signal input: TTL level, negative true or positive true