2.
Make sure the front panel assembly is properly attached to the unit.
3.
Attach failure information to the unit to speed processing.
4.
Place the unit securely in its original packaging or an equivalent heavy-duty box.
5.
Mark the RMA number on your purchase order and on the outside of the box.
6.
Send the unit to the address given when you receive your RMA number.
REPLACING FAN
We do not recommend replacing the single 82 CFM fan yourself. Please contact Xycom
Automation's Product Repair and Customization Department (PR&C). For product re-
pair procedures, refer to page 32.
CLEANING AIR FILTERS
The air filters play a very important role in prolonging the life of your chassis and its
components. Clean, filtered air that circulates through the chassis keeps the tempera-
ture down and prevents component failure by keeping them dust free. All air filters
should be checked and cleaned periodically for optimum system performance.
To Clean the Air Filters
1.
Open the front panel door.
2.
Remove the nut securing each filter housing to the front door.
3.
Slide the housing off.
4.
Clean each filter by running them under water.
5.
Reinstall the completely dried filters.
Warning:
Do not replace the filters unless they are completely dry. Wet filters may al-
low moisture into the chassis, which can cause system failure and malfunction.
33
Maintenance
