Xybix Systems, Inc. • 8207 SouthPark Circle • Littleton, CO 80120 • 800.788.2810 • www.xybix.com
27
Copyright © Xybix Systems, Inc.
Nov 2011
W E L C O M E TO Y O U R X Y B I X F U R N I T U R E
Identifying your hand control, cont...
Logic Data Flush Mount 2-4 Leg
Memory pt. # 14175 & 14181
for multi leg
Logic Data Swing Out 2-4 Leg pt.#
11009 or Multi Leg Memory
Discontinued pt. #11011
Logic Data Reset Instructions
To reset -make sure that nothing is under the console to bind it up or hit (like a trash can etc) and make
sure nothing is hanging over the work surface edges to get caught in between the front and rear surface.
Then hold
“down”
button on the hand control.
The surface should move slowly and evenly all the way down to the very bottom of the last leg stage. Once
it is down all the way, continue to hold the down button until you hear the control box make a “clicking”
noise. Then, let go of the button and the surface will move up slightly by itself about a quarter of an inch,
to the control box’s “Memory Bottom”.
-If the surface does not move or if only one leg moves during reset,
stop trying to reset.
Call Customer Ser-
vice to continue or see trouble shooting graph for further instructions.
*Please note, if you do not see your specifi c hand control pictured above, please contact Customer Service.
Flush Mount Logic Data 2 Leg
Memory pt.# 14175 & 14181
