HK01x manual
5
2.
Reset options and status LEDs
In case of any problems, the xxter device can be reset in several
different ways, see also image 11:
BUT1 Hold during boot
Reset to factory defaults
BUT1 Press shortly
Full restart
BUT1 Press long (longer then 3 sec.)
Reset to factory defaults
BUT2 Press shortly
Reset application (soft restart)
When the xxter device is connected to power, the system status can be
seen using the LED indicators:
LED1 green slow flashing
Currently booting or shutting down
LED1 green continuous
Application started and ready for use
LED2 green slow flashing
Normal operation - OK
LED2 yellow slow flashing
No connection to KNX or enOcean
LED2 red quick flashing
LAN problem, no network
LED2 red / green intermittent
No Internet connection, only LAN connection*
*) the Internet connection is only verified during boot and when the “Check Internet connection”
button is pressed on the status page of the xxter device.
Image 3: xxter rear panel
