6 - POWER STATION USER’S MANUAL
3.4 Audio connections
The MAIN and the AUX inputs on the POWER STATION are fully balanced. If possible,
connect the unit to other devices in a balanced configuration to allow for maximum
interference immunity.
Please ensure that only qualified persons install and operate the POWER
STATION. During installation and operation the user must have sufficient
electrical contact to earth. Electro-static charges might affect the operation of the
POWER STATION!
Fig. 3.1: Different Connector Types and Wiring
Tip = Signal
Tip = Hot
(In Phase)
Tip = Hot
(In Phase)
Ring = Cold
(Out of Phase)
Ring = Cold
(Out of Phase)
Tip = Signal
Sleeve =
Ground / Shield
Sleeve =
Ground / Shield
Sleeve =
Ground / Shield
Sleeve =
Ground / Shield
Cable Clamp
Cable Clamp
Unbalanced use of mono
1/4” jack connector
Balanced use of stereo
1/4” jack connector
Summary of Contents for POWER STATION
Page 1: ...USER S MANUAL ...
