10 - POWER STATION USER’S
MANUAL
5. APPLICATIONS
In the XXL POWER STATION it is possible to use the Main input or the Channel AUX
input to drive each channel. It is also possible to use both of them together in order to
mix two different signals (for example a monitor mix with a click) and to feed with this
mix your own headphone amplifier.
5.1 Using the AUX IN input
The AUX IN inputs are used to add an additional input signal to the master signal, with
the corresponding AUX IN level control is possible to determine the volume of the AUX
IN input signal.
Example: suppose a vocalist wants to record a vocal track that is to be added to already
existing instrumental tracks or a drummer that need a click signal added to the
monitoring track. In these case The playback signal is inserted via the MAIN inputs, and
the pre-amplified vocal signal (or the click) is applied to the AUX connector. Now, using
both the MAIN IN and the AUX IN level controls of the desired channel is possible to
determine the right level of the two signals in the headphone output.
Thanks to the four independent channels of the POWER STATION, four individual
mixes for four musicians can be achieved. In this case is possible to connect four
independent sources (for example four aux outputs of a mixer) one to each channel
AUX IN input of the POWER STATION.
5.2 Using the MAIN IN input
The POWER STATION can also be used to drive four independent headphones driven
by the same input signal (for example you can feed it from the main output of a mixer or
from an aux output). In this case
Summary of Contents for POWER STATION
Page 1: ...USER S MANUAL ...
