XWOW R2, Product Manual

Page: 24 / 48

PRODUCT USE
First use
2 1
6. Do not move the station after mapping.
If the house environment changes a lot, the robot will remap; on the map conceived after mapping done, rooms are
divided based on floorplan. Then, you can use more personalized cleaning settings in future cleaning.
4. Turn on and charge the robot.
Press and hold the Power Button until the power supply indicator is solid on. Then, put the robot into the station as shown
in the figure. The robot is built in with a high-performance Lithium ion chargeable battery pack. To maintain the battery
performance, please keep a sufficient battery level.
5. Connect the robot to network.
Press the Charge Button and Start Button on the robot at the same time for about 6 seconds. Finish network connection
based on voice prompts and app steps. After network connection done, you can start a cleaning task using the phone
(Note: Please make sure that the robot has been installed with mop before starting a cleaning task).
The device has
been started up.