STEP 1.
Remove all packaging and place
the Speed Dome on a secure
level surface. You should
position it so the camera is
upsidedown.
STEP 2.
Carefully remove the camera’s
cover from its base.
STEP 3.
You should now be able to see
the
ribbon wiring
at the back
of the camera. This wiring needs
to be protected during the next
few steps.
STEP 4.a.
Tilt the camera body upwards.
STEP 4.b.
Remove the small grey padding
under the camera.
STEP 5.
Remove the
front
semi-
circular padding.
STEP 6.
Carefully remove the
rear
semi-circular padding. The
ribbon wiring should be
positioned neatly under the
camera body.
STEP 7.
Tilt the camera body back
down to its original position.
STEP 8.
Re-attach the camera’s cover
ensuring it clicks back into
place.
Refer to the XSD27ZDN Product
Manual for further installation
and operating instructions.
Thank you for purchasing this Xvision Colour 550TVL Speed Dome.
Before operating this product, please read this pre-installation guide.
PRE-INSTALLATION GUIDE
Manufactured exclusively for:
Xvision (Europe) Group,
Head Office: London, U.K.
Email: [email protected]
Web: www.x-vision.co.uk
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 1 Year warranty. The Warranty excludes products that have been misused, (including
accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a
problem with this product, it should be returned to the place of purchase.
