background image

CCTV

Model:

VIS338D

Colour Varifocal Dome
Camera

CCTV

Model:

VIS338D

Colour Varifocal Dome Camera

Manufactured exclusively for:

Xvision (Europe) Group,

Head Office: London, U.K.
Email: [email protected]
Web: www.x-vision.co.uk

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local
distributor.

LIMITED WARRANTY:

This product is supplied with a 2 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the
place of purchase.

Before you begin

Please unpack the box carefully and identify that all the parts are present.

Do not cut the camera cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the camera by 

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.

The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with 
such a large lux level variation.

Summary of Contents for VIS338D

Page 1: ... the place of purchase Before you begin Please unpack the box carefully and identify that all the parts are present Do not cut the camera cables this will void the warranty Make sure you use only the recommended power supply Damage caused to the camera by incorrect voltage or wiring is not covered by the warranty The camera is suitable for indoor or outdoor use Please bear in mind the following po...

Page 2: ...er HAD CCD sensor and Xvision Pixel Varifocal lens which allows easy selection of the optimum viewing angle required during installation and will provide images in light levels as low as 0 2 lux The camera is designed for internal use and ceiling mounting Super High Resolution CCD sensor provides great quality Colour images in light levels of 0 2 lux and above Discreet styling for unobtrusive low ...

Page 3: ...Compensation VR Adjustment Level for DC Drive Lens Inside Control Board Colour Normal Resolution Xvision IXC1HQE Digital Signal Processing DSP chip which has been optimised for internal viewing and features Automatic Gain Control Automatic Electronic Iris Auto White Balance Back Light Compensation Low Smear Edge Enhancement and Zero Colour Rolling Xvision Pixel Varifocal 3 3 to 12 0mm Auto Iris le...

Page 4: ...by rotating the screw TELE Anti clockwise WIDE Clockwise until you get the desired view After adjustment tighten both STEP 4 Set the final image position by moving the camera body some model types limit the PCB board to 180 rotational adjustment and set the focus by turning the lens to the left or right When the camera focus adjustment is complete replace the dome housing by rotating clockwise to ...

Reviews: