background image

3. Operation

The unit has automatic input format detection and adjusts the output to match 
the input. The unit will also pass thru any HDCP encryption, so your protected 
content can be played on an HDCP-compatible display on the other end.

1.   Connect unit to power and (if applicable) connect equipment to the AC 

outlet.

2.   The unit will boot and the Operation LED will blink periodically to indicate 

device operation

3.   Connect the HDBaseT LINK connector to an HDbaseT®-compliant transmitter. 

The Link LED will light up.

4.   As soon as a valid video source is detected by the transmitter, and a valid 

video sink (display, projector, etc) is detected by the receiver, the HDMI LED 
will light up to indicate video transmission. See the LED Modes Charts table 
below for more details about LED behaviour.

5.   Ethernet devices may be connected to the Ethernet port, which will provide 

a 100Mpbs Ethernet link to the receiver’s Ethernet port.

TIP :

 

 For best performance, use only HDBaseT-approved CAT6 cable. Contact 
Theatrixx for more information.

 
LED Modes Chart

Operation LED 

1 sec blink 

Device is operating normally

Link LED   

Solid on 

HDBaseT link established

 

 

 

Low speed blink 

Low Power mode

 

 

 

High speed blink 

Ethernet fallback mode

 

 

 

Off 

No link

HDMI LED 

Solid on 

 HDMI/DVI content exists – with HDCP 
encryption

 

 

 

Blink 

 HDMI/DVI content exists – without 
HDCP encryption

 

 

 

Off 

No HDMI

Summary of Contents for TXVV-HDBT2HDMI-TRUE1













Reviews: