．
22
．
■
Audio Control
A.Audio Sounding/Mute
Press button, or press [Ctrl+M] Key, to activate audio when the client is connected to the
DVR or the client is playing pre-recorded stream file.
Press button, or [Ctrl+M] Key to deactivate audio.
B.Volume Control
To adjust audio volume, use the audio volume slider or use [Up] and [Down] Key as well.
You can make your DVR state to start/stop recording and start/stop playback remotely. DVR
control buttons are shown in Fig.5.
■
DVR Control
Fig.5. DVR Control Buttons
DVR Control
A. Recording
Press button (or press [Ctrl+Shift+R] key) to make your DVR start recording. Then you will
see recording status on the Status Window. The Status Window will indicate the current status
of your DVR as in Fig.6.
Fig.6. The Status Window [DVR Recording State]
Press button (or press [Ctrl+Shift+S] key) to make your DVR top recording.
B. Playback
If you want to start DVR playback, press button (or press [Ctrl+Shift+P] key) to get recorded
event log. The client will receive event log from your DVR and show you the list. Fig.7 shows the
DVR Event Log.
Fig.7. DVR Event Log.
