44
Version 1 – GBR (25/10/2022)
D-502-0287
-
Fit the EPP unit lid (position 6) onto the bottom rail of the unit so that the bottom edge of the lid and the
top edge of the unit rail are pressed together.
-
Screw back the 5x M6x25 screw to secure the lid. Tighten it with adequate force to prevent them from
turning.
-
Secure the EPP cover of the unit through the control cover plate with a
Ø 3
.5x20 self-tapping screw.
-
For the further procedure, refer to chapter 6.2. Filter Inserting
-
To revive the unit after servicing, follow the steps in chapter 5.
Fig. 64
2) SECURE THE CABLE WITH A TIE STRAP
3) TIGHTEN THE 5x SCREW M6x25
5) INSERT THE FILTERS AND FILTER
6) PUT ON THE PLASTIC LID AND SECURE IT
4) SECURE THE CONTROLLER PLATE WITH A SELF-TAPPING SCREW
Fig. 60
Fig. 61
Fig. 62
Fig. 63
