background image

WARRANTY 

YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER 

THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR 

BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY. PLEASE TELEPHONE 

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A 

CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE 

RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major 

failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods 

repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have 

suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting 

our customer service helpline above.

1 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY (Do It 

Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes 

consumable parts, for example: driver bits.

WARNING

The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.

XU1

Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175

Input Voltage:    

18V

Battery Capacity: 

4.0Ah Li-Ion

Power Consumption: 

72Wh

Tool Weight: 

 

0.635kg

SPECIFICATIONS

CONTROLS

OPERATION

Battery Capacity Indicator

There are battery capacity indicators on the battery pack. 

Check the charge capacity of your battery before use and 

charge if necessary.
1.  To check the battery capacity, press the button to the side 

of the indicator LEDs.

2.    Indicator  Status:

- 3 lit LEDs: Battery fully charged.
- 2 lit LEDs: Battery 60% charged.
- 1 lit LED: Battery almost discharged.

Fitting the Battery Pack

1.  Slide the battery into the base of the tool until it clicks into 

place. 

2.  To remove the battery, press and hold the battery release 

tab down then remove the battery.

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should 

not be disposed of with household waste but 

in an environmentally friendly way. 

Please recycle where facilities exist. Check 

with your local council authority for recycling 

advice.

Recycling packaging reduces the need for 

landfill and raw materials.

Reuse of recycled material decreases 

pollution in the environment. Please recycle 

packaging where facilities exist.

Check with your local council authority for recycling 

advice.

PROPER USE

SETUP

This tool is intended for use in a DIY (Do It Yourself) context 

or for hobbyist purposes. It is not built for continuous daily 

use in a trade or professional capacity.
Before using the machine, carefully read these instructions, 

especially the safety rules to help ensure that your machine 

always operates properly.
Before attempting to operate the machine, familiarise 

yourself with the controls and make sure you know how to 

stop the machine quickly in an emergency.
Save these instructions and the other documents supplied 

with this machine for future reference.

Charging Your Battery

1.  Insert the power plug of the charger into the mains socket 

outlet. 

 2.  To charge the battery, slide the battery pack onto the port 

in the charger. Make sure the release latch on the rear 

of the battery snaps into place and the battery is secure 

before charging.

3.  Remove the battery from the charger once fully charged 

by pressing the battery release latch and pulling the 

battery pack from the charger at the same time.

4.  Disconnect the charger from the power supply.

ALWAYS WEAR EYE, FACE AND 

EAR PROTECTION

WARNING! 

Ensure the tool is turned off and 

disconnected from the power supply before 

performing any of the following operations.

Reviews: