MAINTENANCE
WARRANTY
YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A
CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR
WARRANTY. PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY
QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and remedies which are available to you at
law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to
a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have
suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: Blower tube.
WARNING
The following actions will result in the warranty being void.
• Professional, Industrial or high frequency use.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
XU1
Australia/New Zealand (Head Office)
Ozito Industries Pty. Ltd
. 25 Fox Drive, Dandenong South, Victoria, Australia 3175
5
WARNING!
Ensure the tool has completely
stopped and battery is disconnected before
performing any of the following operations.
CARING FOR THE
ENVIRONMENT
Power tools that are no longer usable should
not be disposed of with household waste but
in an environmentally friendly way.
Please recycle where facilities exist. Check
with your local council authority for recycling
advice.
Recycling packaging reduces the need for
landfill and raw materials.
Reuse of recycled material decreases
pollution in the environment. Please recycle
packaging where facilities
exist. Check with your local council authority
for recycling advice.
Cleaning
• We recommend that you clean the appliance
immediately after you use it.
• Keep the safety devices free of dirt and dust as much
as possible. Wipe the equipment with a clean cloth.
• Keep air intake clean and air vents free of debris to
avoid overheating the motor.
• Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact
with the tool.
• If the blower vibrates abnormally, stop motor
immediately. Abnormal vibration usually indicates a
mechanical problem. Continued operation could lead
to injury or damage.
• No lubrication is necessary as the motor is equipped
with lifetime lubricated bearings.
Storage
• Store the tool in a dry location which is not accessible
to unauthorised persons.
Note: Ozito Industries will not be responsible
for any damage or injuries caused by the
repair of the Blower by an unauthorised
person or by mishandling of the Blower.
This tool is designed for DIY use - use in
commercial or industrial environments will
void the warranty.
Problem
Cause
Remedy
Blower is not starting
Possible clogging
Clean the blower tube and
blower outlet of any leaves
or debris
Battery is low in charge
Charge battery
Battery not inserted fully
Insert battery pack fully
Blower is not operating at
full capacity
Possible clogging
Clean the blower tube and
blower outlet of any leaves
or debris
Motor stop while operating Battery has no power
Charge battery
TROUBLESHOOTING
