XTZ EDGE A2-400 Manual Download Page 5

5

4

DANGER! 

No user serviceable parts inside. Service is to be 

performed only by XTZ.

WARNING! 

To reduce the risk of fire or electric shock, do not 

expose this apparatus to rain or moisture.

WARNING! 

This apparatus shall not be exposed to dripping 

or splashing, and no objects filled with liquids, such as vases, 

shall be placed on the apparatus.

WARNING! 

This  apparatus  shall  be  connected  to  a  MAINS 

socket outlet with a protective earthing connection. 

10. 

Only use attachments/accessories specified by the 

manufacturer.

11.  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

12. 

Refer  all  servicing  to  qualified  service  personnel.  Servicing 

is required when the apparatus has been damaged in any 
way, such as power supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.

13.  The appliance coupler is used as the disconnect device and 

shall remain readily operable.

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat 

registers,  stoves,  or  other  apparatus  (including  amplifiers) 

that produce heat.

9.  Protect the power cord from being stepped on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

Important Safety Instructions

Summary of Contents for EDGE A2-400



























Reviews: