XTZ EDGE A2-400, Manual, Page: 11 / 26

11 10
AUTO START SE LECTOR
- ALWAYS ON The amplifier will never go into standby, it will always be on.
- TRIGGER 12V The amplifier will go into standby in absense of 12V trigger signal.
- AUTO ON The amplifier will go into standby in absense input signals.
TRIGGE R 12V
- TRIGGER 3.5 mm mono jack for pre -amplifiers that suppor t trigger out.
INPUT SELECTOR
- RCA Set when using RCA unbalanced input audio cables.
- XLR Set when using XLR balanced input audio cables.
STE REO or BRIDGED
- STEREO Regular stereo amplification mode.
- BRIDGED/BTL Bridged mono (bridge -tied load) amplification mode.
CLIPPING LED
- CLIPPING Blue clipping indicator LED (blinking).