9 (16)
Mounting and connecting tips
Mounting
alternatives
XTZ Divine 100.49 can be placed standing by a
wall. The wall behind and beside the loudspeaker
influences both the bass level and the bass
characteristics, so please be patient and try
different distances to the rear and side walls.
To place the speaker with a distance to the wall is
often best, to decrease influence of the wall (room)
Connect using the
correct phase
Always connect using the correct phase, from the
+-pole on the amplifier to the +-pole on the
loudspeaker and corresponding for minus (-).
If you by accident connect the other way,
there is no risk of damage. However, the
sound will not be correct, especially in the
lower frequencies.
Overload
At high load during extensive time periods, there is
always the risk of overloading the driver and
amplifier.
All loudspeakers have a limited handling
capacity for high power, so be careful not
to play extremely loud and not to increase
treble or bass settings to much.
By increasing the bass or treble from 0 to
max you will increase the power by about
16 times.
The initial playing
time
It takes about 50 to 100 hours of initial playing
time, for the drivers to sound optimal. During this
time, the speaker may be used normally.
