Power switch
(ON, OFF)
Power switch. Press down "I" to power on and the indicator
will
be lighted. Press "0" to power off. Make sure it is set OFF
when connecting / disconnecting cables.
There is an automatic switch on the subwoofer. When it has
signal in, it will switch on and consequently switch to
standby (this is indicated by the LED, which turns green
when standby is present) when no signal is present (after a
certain time period). Therefore, you can have it ON
constantly.
To obtain the optimal sound, you should let
the subwoofer be in ON mode. The amplifier
will then immediately have the right
working temperature from the beginning.
Turn off the subwoofer if it is not in use for a
long period.
VOLUME
Controls volume level of subwoofer.
Be gentle on the
volume knob,
please remember that certain sound signals
may contain a lot of energy.
CROSSOVER
Variable control from 50Hz to 250Hz provides optimum
setting of subwoofer crossover frequency to match crossover
frequency of Home Theatre components.
PHASE
0-180 phase adjustment
SUB IN
Line-level input to subwoofer. Use these RCA jacks to
connect audio signals from line-level outputs on a receiver,
preamplifier, television set or surround sound decoder.
Certain types of simplier low level audio
cables may create a noise in the subwoofer.
We recommend double shielded low level
cables to be used.
SUB OUT
To pass the signal on to an additional active subwoofer.
AC INPUT
Connect to regular 230 V / 50 Hz.
