Control Descriptions
By using the controls and the supplied bass plug, you can
alter the sonic characteristics in a wide variety. This is a
great aid in obtaining the optimal sound.
Sound is always a matter of time, so please
take yout time to find the sound to fit your
personal taste.
For further instructions on the controls and
connections mentioned here, see the chapter
Functional reference
.
VOLUME
Controls volume level of subwoofer.
Be gentle on the volume knob, please
remember that certain sound signals may
contain a lot of energy.
CROSSOVER
Using this variable control, you can adjust the boundary
frequency for the low pass filter from 50Hz to 250Hz. You
can hereby change the character of the woofer, depending on
what you prefer (more or less deep) and matched to your
other speakers.
On modern amplifiers you commonly have the possibility to
set the size of the loudspeakers (small / big etc). If you have
small front speakers, you should set the size to small. Thus,
they will recreate middle bas, mid-range and trebble much
better - leaving the deep bass tones alone to the subwoofer.
PHASE
Variable control for 0-180 phase adjustment.
In a normal installation, this should be set to
0. But it will have impact on the sonic
characteristics, especially the co-operation
with the front speakers.
