Page: 8
Mounting and Connecting tips
Mounting
alternatives
Normally the XTZ 99.26 Center is placed near a TV
set or a projector screen. The wall behind affect the
reproduction of the speaker and characteristics.
Please take your time to try out the best placement.
Connect using the
correct phase
Always connect using the correct phase, from the
+-pole on the amplifier to the +-pole on the
loudspeaker and corresponding for minus (-).
If you by accident connect the other way,
there is no risk of damage. However, the
sound will not be correct, especially in the
lower frequencies.
Overload
At high load during extensive time periods, there is
always the risk of overloading the driver and
amplifier.
All loudspeakers have a limited patience
for high power, so be careful not to play
extremely loud and not to increase treble
or bass settings to much.
By increasing the bass or treble from 0 to
max you will increase the power by about
16 times.
The initial playing
time
It takes about 50 to 100 hour of initial playing time,
for the driver to sound optimal. During this time,
the speaker may be used normally.
Rotate tweeter
A Center speaker can both be used as standing or
lying down. The tweeter can therefore be rotated 90
deg, so it can fit the need of the owner.
