L2 Trucking Products Inc
XLT-UM-DRL1801-RV190613
Page 3
The main component of this kit is the drill itself. This is a high powered drill that requires a
T.E.D. anytime it is used. A
T.E.D. is a torque elimination device
specifically made for use
with the XLT drill to create a safe user environment. As you can see by the picture on the
previous page, this drill is not like most standard drills available. This drill uses a steering wheel
design which was specifically created due to the torque and power generated when needed.
Like a steering wheel on a vehicle it is meant to be controlled with both hands on it during use.
That is due to the power generated by the drill.
Both hands
should always be on the drill
during use to prevent injury and to accomplish the task at hand (raising/lowering trailer or
opening/closing grain hopper doors) along with a T.E.D. being utilized for safety purposes.
Two T.E.D. (torque elimination device) straps are part of the original kit or one T.E.D.
permanent plate is supplied. Both are explained later in this user manual and when properly
used will prevent the drill from spinning or turning which could potentially injure the user. The
permanent plate typically works with a fixture attached to the trailer during fleet installation.
The battery charger is a 110/120V AC charger that was specifically designed to only charge the
18V DC lithium-ion batteries used by the XLT drill. This charger should only be used for these
special batteries and likewise, the batteries should only be charged on this charger.
The battery in this drill kit is either a 4AH or 5AH battery rated at 18V DC. One battery comes
standard with the kit. Each battery will raise and lower many trailers easily between charges.
A QUICK START
card is part of this kit. This QUICK START card has several statements as to
proper use of the drill and also has a QR CODE to allow for online access to this user manual.
This drill kit may or may not come with a coupler. Specific couplers are made and can be
purchased separately or with this kit. These couplers address the unique shafts used to control
the raising and lowering of trailer legs and opening and closing of grain hopper doors.
XLT DRILL KIT COMPONENTS
