IMPORTANT SAFETY INFORMATION
The heater is designed and approved for use as a construction heater in accordance with the Standard
for Gas-Fired Construction Heaters ANSI Z83.7 ● CSA 2.14. CHECK WITH YOUR LOCAL FIRE SAFETY
AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS. Other standards govern the use of
fuel gases and heat producing products in specific applications. Your local authority can advise you about
these.the intended use is the temporary heating of a building or structure under construction,alteration,
or repair.
Keep children and animals away from heater. Never move, handle or service a hot or operating heater.
Severe burns may result. Wait 15 minutes after turning heater off. To prevent injury,wear gloves when
handling heater. Turn off propane supply to heater when not in use. Use only original replacement parts.
This heater must use design-specific parts. Do not substitute or use generic parts.Improper replacement
parts could cause serious or fatal injuries. Installation of this appliance at altitudes above 2000 ft (610 m)
shall be in accordance with local codes, or in the absence of local codes, the National Fuel Gas Code,
ANSI Z223.1/NFPA 54, or National Standard of Canada, Natural Gas and Propane Installation Code, CSA
B149.1..The heater should be inspected before each use, and at least annually by a qualified service
person.
3
SAVE THESE WARNINGS
The hose assembly shall be visually inspected prior to each use of the heater. If it is evident there is
excessive abrasion or wear, or the hose is cut, it shall be replaced prior to the heater being put into
operation. The replacement hose assembly shall be that specified by the manufacturer. Blower or radiant
type heaters shall not be directed toward any propane-gas container within 20 ft (6 m).
Summary of Contents for 96956
Page 9: ...TROUBLESHOOTING 8 ...
