INSTALLATION
3
4
Put the crystal stone to ember bed. First, take off
glass from appliance. Then put crystal stone on
ember bed.
Fix the tempered glass with 2pcs of 4*8mm white
screws on both sides as provided.(Fig.5)
• Place the front glass surround over the front of the
fire aligning the slots in the bracket at each side of
the glass panel with the lugs on the sides of the fire;
See Fig.4
• Again, two people will be required for this operation.
Manual Operation
The switches located at the center right hand side
of the fire .The standby switch must be first switch
on.