CARE AND MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is more efficient, easier to control and will have fewer
problems.
2.
Inspect the tool components periodically. Repair or replace damaged or worn components. Only use
identical replacement parts when servicing.
3. Maintain the tool's labels and name plates. These carry important information. If unreadable or missing,
contact customer service for replacement.
WARNING:
ONLY
qualified service personnel should repair the tool. An improperly repaired the tool.
An improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Wipe clean as needed. Use mild upholstery cleaner (not caustic) to clean the chest deck pad as needed.
LUBRICATION
DO NOT
lubricate the casters. This can damage the mechanism.
STORAGE
1. Remove the leg lock pins from each leg. Hold the ladder when removing the second pin as the base frame
will fall to the floor. Store the pins in the creeper's pouch.
2. Push the ladder's angle support arms back towards the ladder.
3. Lift each leg up until it rests next to the ladder assembly.
4.
Store the creeper vertically. Make sure the rear casters are locked once in place.
REMOVAL FROM STORAGE
1. Lower each leg.
2.
Pull the ladder's angle support arms forward to settle in a height adjustment notch.
3. Remove the leg lock pins from the pouch.
4.
Lift the base frame and push the leg down until the bolt holes align. Push the leg lock pin through and turn
the end down. Repeat with the other leg.
5.
Unlock the rear casters and it is ready for use.
5
