6
11
Reverse Playback
Two times reverse playback:
Press
during normal playback, the video file will be
played with a speed two times faster, Press
to resume the normal playback speed.
Four times reverse playback
: Press
twice during normal playback, the video file
will be played with a speed four times faster, Press
to resume the normal playback
speed.
Eight times reverse playback:
Press
three times during normal playback, the video
file will be played with a speed eight times faster, Press
to resume the normal play-
back speed.
Pause
Press
to pause the video, Press
again to resume the normal playback
speed.
Stop
Press
ESC
button to stop playing and return to File List mode.
During Video Playback
Press
pause button, the video will be
paused, and the setting items will appear
In File List mode Press
button, the setting items will appear:
In the upper-file Press
button, the setting items will appear:
Motion Detection Mode (Press REC to start recording)
Select Motion Detection and press to
enter.
Press REC button on the remote controller to start Recording.
Press STOP button to finish recording.
If the PIR does not sense motion the recording will stop, “Detecting” will appear
in the bottom of screen until the motion is detected, then recording will start again.
In
Mo-
tion
Detect
Resolution
(352*288 /640*480/720*56/1024*768/128
0*720/1280*960)
Quality (Good/Norma/ Low)
Frame Rate ( 1 / 5/ 15 /20/25)
Audio (Enable/Disable)
Not available in all models
Frame Counter Stamp (On/Off)
Timestamp (On/Off)
Device ID Stamp (ON/Off)
Motion Detect Level ( High/Medium/Low)
Motion Detect Duration (30 sec/1min/3
min/ 5 min/ 10min)
Motion Detect Zone >Press |u to select the
area for target of motion detect.
Microphone Sensitivity
Not available is all models
Overwrite
