XtremeAir GmbH, Harzstr.2, D-39444 Hecklingen
Document No.
SB-2013-002
Tel: +49 39267 60999 0, Fax: +49 39267 60999 20
www.xtremeair.de [email protected]
Issue:
A.01
DOA-Nr.: EASA.21J.360
Service Bulletin SB-2013-002
Date: 15.4.2013
Replaces Service Bulletin No. / Date:
Not applicable
Page 7 / 8
55. Temporarily secure the electrical cable on the wing lh/rh with tape. (Picture 9)
56. Position the aileron rod inside the wing as shown in picture 10.
Attention:
Do not damage the aileron rod .
57. Fix all cables and hoses in the fuselage. Temporarily fix the control stick in neutral position.
58. Remove the fuel selector linkage (XA42-2840-100)
59. Install the wing and use the main bolts: Front bolts (XA42-5320-250), rear bolts (XA42-5320-
340).
60. Install the lower fuselage longeron connectors (XA42-5320-239).
Secure the opposite bolts with safety wire 0,8mm "MS20995C-32".
Picture 9
Picture 10
