XtremeAIR Pro-X Series Installation Manual & User Manual Download Page 3

                                                 

www.XtremeAirUsa.com

                                                                    PAGE 

3

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

 
 
 
WARNING

 

-

 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE   

                        THE FOLLOWING: 

 

Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer 

 

PRODUCT

Do  not  remove  permanently  affixed  labels,  warnings,  or  plates  from  the  product.    This  may  void  the 

warranty. Do not try to alter the hood 
 

INSTALLATION

:

 

The  installation  in  this  manual  is  intended  for  qualified  installers,  service  technicians  or  persons  with 

similar qualified background.    Installation and electrical wiring must be done by qualified professionals and in accordance 
with all applicable codes and standards, including fire-rated construction.    When cutting or drilling into wall or ceiling; do 
not  damage  electrical  wiring  and  other  utilities.    Due to the size and weight of this range hood, two people installation is 
recommended.    Range  hood  may  have  very  sharp  edges;  please  wear  protective  gloves  if  it  is  necessary  to  remove  any 
parts for installing, cleaning or servicing. 
 

VENTTING

For  kitchen  range  or  cook  top  ventilating  use  only.    DO  NOT  use  to  exhaust  hazardous  or  explosive 

materials and vapors.    Ducted fans MUST always be vented to the outdoors.    DO NOT vent exhaust into spaces between 
walls, crawl spaces, ceiling, attics or garages.    Use only metal ductwork.    Old duct work should be cleaned or replaced if 
necessary to avoid the possibility of a grease fire.    Check all joints on duct work to insure proper connection and all joints 
should be properly taped. 

 

ELECTRICAL: 

All  electrical  wiring  must  be  properly  installed,  insulated  and  grounded.    Before  servicing  or  cleaning 

unit, turn power OFF and un-plugged   

 

OPERATION: 

Use high settings on cooking range only when necessary.    Keep all fan, baffle, spaces, filter, grease tunnel, 

oil container and grease-laden surfaces clean.    Grease should not be allowed to accumulate on fan, baffle, spaces, filter, 
grease tunnel and oil container.    Never allow the filters to become blocked or clogged. Do not allow foreign objects, such 
as cigarettes or napkins, to be sucked into the hood. 

 

WARNING

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: 

■ Never leave surface units unattended at high settings.    Boil overs cause smoking and greasy spillovers   
    that may ignite.    Heat oils slowly on low or medium settings. 

        ■ Always turn hood ON when cooking at high heat or when greasy food. 
        ■ Clean ventilating fans frequently.    Grease should not be allowed to accumulate on fan or filter. 
        ■ Use proper pan size. Always use cookware appropriate for the size of the surface element.

 

 
WARNING: 

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE,   

                        OBSERVE THE FOLLOWING

        ■ 

SMOTHER FLAMES

 with a close fitting lid, cookie sheet, or metal tray, then turn off the burner. Be careful   

            to prevent burns. If the flames do not go out immediately, 

EVACUATE AND CALL THE FIRE DEPARTMENT

        ■ 

NEVER PICK UP A FLAMING PAN

 - you may be burned. 

        ■ 

DO NOT USE WATER

, including wet dishcloths or towels - a violent steam explosion will result. 

        ■ Use an extinguisher 

ONLY

 if: 

            – You know you have a class ABC extinguisher, and you already know how to operate it. 
            – The fire is small and contained in the area where it started. 
            – The fire department is being called. 
            – You can fight the fire with your back to an exit. 

 

 

 
 

IMPORTANT SAFETY INSTRUCTIONS-continue 

Summary of Contents for Pro-X Series















Reviews: