Xtreme XR1267 Operation & Safety Manual Download Page 40

Page: 40 / 80

Page 38

Xtreme Manufacturing, LLC

Operator Cab

XR1267

Gear Select Switch

The Gear Select switch has a twist grip handle with

three (3) positions: 1 – FIRST, 2 – SECOND, and 3 – THIRD

NOTE:

The reach forklift can be operated in three (3)

forward and three (3) reverse gears

Figure 6-17. Gear Select Switch.

Parking Brake Switch

The Parking Brake switch (A) has two (2) positions: ON

and OFF

Figure 6-18. Parking Brake.

(A) Parking Brake Switch Guard. (B) Parking Brake Indicator.

Set Parking Brake switch (A) to ON (DOWN) to engage the

parking brake and to OFF (UP) to disengage the parking

brake The parking brake indicator (B) illuminates when

the parking brake is set to ON (engaged)

Load Capacity Charts

Load capacity charts are located on the left side of the

front control panel Load capacity charts are provided to

assist the operator in determining how to safely handle

loads with the reach forklift, including boom angle, height,

and reach

Figure 6-19. Typical Load Capacity Chart.

Hydraulic Oil Temperature Indicator

The hydraulic oil temperature indicator illuminates when

the oil temperature is above 180°F (82°C)
If the hydraulic oil temperature indicator illuminates,

stop and idle the engine to allow time for cooling If the

hydraulic oil temperature indicator does not go out after

five (5) minutes, stop the forklift, follow proper shut down

procedures, tag the forklift with “Do Not Operate” tags,

and have a qualified mechanic service or repair the forklift

BEFORE

placing it into service again

Figure 6-20. Hydraulic Oil Temperature Indicator.

Summary of Contents for XR1267

















































































Search results

Summary of Contents for XR1267

Reviews:

Brands by name

Popular brands

Xtreme XR1267, Operation & Safety Manual

Search results

Summary of Contents for XR1267

Reviews:

Brands by name

Popular brands