Xtreme XR1255, Operation Manual

Page: 68 / 80

Page 66
Xtreme Manufacturing, LLC
Operation XR1255
7)
Protection must be provided for the personnel in their
normal working position on the platform from moving
parts of the rough terrain forklift that represent a hazard
8)
Information prominently indicated on the platform;
A) Maximum work load including personnel and
equipment
B) Weight of empty platform
9)
Provide a means so that the platform can only be
centered laterally on the rough terrain forklift truck and
retained against the vertical face of the forks, carriage, or
lifting mechanism
10)
Provide a means to securely attach the platform to
the lifting mechanism, and to prevent the platform from
inadvertent pivoting
11) Provide restraining means for securing personnel
such as an anchorage for attaching the lanyard of a body
belt or harness
12) Provide a guardrail or similar structure with a
nominal height to the platform floor of 42” around its
upper periphery and include a mid rail It may be hinged,
removable, or of chains, and used if proper positioning is
easily discernible Such restraining means shall be capable
of withstanding a concentrated horizontal force of 200 lbs
applied at the point of least resistance without permanent
deformation A body belt and lanyard is to have an
attachment point provided for freedom of movement, and
its length is limited to a free-fall of 5’ measured from the
point of attachment to the operator The complete system
shall be capable of withstanding three consecutive drop
tests to simulate a 250 lbs person free falling 6’ without
allowing the test weight to fall free to the ground A
deceleration device may be included
13)
Lanyards shall be arranged so as not to cause a
tripping hazard
14)
Body belts should have a width of a least 1 75”
15) Structural safety factor – all load supporting structural
elements of the work platform shall have a structural
safety factor of not less than 2 to 1 based on the minimum
yield strength of the material used
Capacity Limitations:
The combined weight in pounds of the platform, load
and personnel shall not exceed 33% of the capacity of
the related load center position indicated on the machine
load chart
Preparation and Set-Up:
1) DO NOT
alter or modify the work platform in any
manner that is detrimental to its safe use
2)
Make sure that the work platform is securely attached
to the quick attach or forks Follow the platform
manufacturer’s instructions
3) Make sure the platform, carriage and forks are secured
to prevent them from pivoting from side to side
4) On side tilt or swing carriage, the carriage must be
centered and/or leveled horizontally and vertically
The hydraulic system quick disconnects must also be
disconnected and the carriage securely fastened to
prevent any tilting or side to side swinging motion
5)
Ensure the vehicle has a firm footing and is level
6)
Be sure the vehicle is in a level position (side to side)
before any operation is begun Use the frame sway
to level the vehicle If the vehicle cannot be leveled,
reposition the vehicle
7) Place the travel select lever in the NEUTRAL position
8) Engage the parking brake switch Blocking the wheels
is also recommended
9)
Level the platform in both the side-to-side and front-
to-back directions before use
10)
Before lifting or lowering personnel, be sure the
vehicle lifting mechanism operates smoothly through the
entire lifting and lowering of the platform and maintains
its self leveling function The vehicle must operate
smoothly both empty and loaded
11) Lift and lower personnel smoothly, with caution, and
only at their request
12) Keep hands and feet clear of controls other than
those in use
13)
Be certain that the path of platform travel is clear
of hazards, e g , storage racks, scaffolds, overhead
obstructions, and electrical wires
14)
Be sure any lift limiting devices and latches are
functioning properly
15) A trained operator shall be in position to control the
rough terrain forklift truck When the operator is not in
the operating position, block the truck wheels and apply
the parking brake with all controls in neutral
16) Alert elevated personnel before moving the platform
Then move the platform smoothly and with caution
17)
Always lower the platform if you must move the
rough terrain forklift truck for adjustment in positioning
18)
Be certain that personnel and equipment on the
platform do not exceed the available space
19) Any body belt, lanyard or deceleration devices which