Xtreme Power Conversion Corporation
XPDU’s User’s Manual
Page 5
Uninterruptible Power Supply
Environmental
Operating Temperature (Max) : 0 to 50 degrees C (+32 to +122 degrees F)
Operating Elevation
: 0 to 3,000m (0 to +10,000 ft)
Operating and Storage Relative Humidity: 0 - 90%, non-condensing
Storage Temperature
: 0 to 65 degrees C (+32 to +149 degrees F)
Storage Elevation
: 0 to 15,000m (0 to +50,000 ft)
Receiving Inspection
After removing your XPD from its carton, it should be inspected for damage that may have occurred in shipping.
Immediately notify the carrier and place of purchase if any damage is found.
Warranty claims for damage caused by the carrier will not be honored.
The packing materials that your XPD was shipped in are carefully designed to minimize any shipping damage.
In the unlikely case that the XPD needs to be returned to XPD, please use the original packing material.
Since XPD is not responsible for shipping damage incurred when the system is returned, the original packing
material is inexpensive insurance.
PLEASE SAVE THE PACKING MATERIALS!
Standard Package includes:
a. PDU
b. Standard 19” rack, mounting hardware (if applicable)
c. Vertical Mount (0U), mounting hardware (if applicable)
d. Quick Guide
Installation
Installation Configuration: The XPD supports horizontal 1U rack mount and vertical 1U rack mount installation.
Horizontal Installation (1U)
1. Attach the two XPD horizontal mounting brackets (included) on each end of the XPD using four retaining
screws (included) (Fig. 1).
2. Install the XPD in a suitable horizontal location in the rack rail using four user-supplied mounting screws.
3. Connect the grounding lug of the XPD to a ground point on the rack rail.