Xtreme Power Conversion Corporation
XPD-IT6kW & IT10kW User’s Manual
Page 6
Uninterruptible Power Supply
3.2
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to minimize the possibility
of damage to the Transformer box and extend the life of the Transformer box. Please follow the
instructions below:
1.
Keep at least 20cm (8 inches) clearance from the rear panel of the unit from the wall or other
obstructions.
2.
Do not block the air-flow to the ventilation openings of the unit.
3.
Please ensure the installation site environmental conditions are in accordance with the unit’s
working specifications to avoid overheat and excessive moisture.
4.
Do not place the unit in a dusty or corrosive environment or near any flammable objects.
5.
This unit is not designed for outdoor use.
3.3 Install into rack enclosure
Step 1: Attach mounting ears to the side mounting holes of Transformer box using the screws provided
and the ears should face forward. Please refer to chart 1.
Step 1
Step 2: Lift the Transformer box module and slide it into rack enclosure. Attach the Transformer box
to the rack with screws, nuts and washers (user-provided) through its mounting ears and into the rack
rails. Please refer to chart 2.
Step 2
