Xtreme XPD-IT10KW User & Installation Manual Download Page 3

Xtreme Power Conversion Corporation

XPD-IT6kW & IT10kW User’s Manual

Page 3

Uninterruptible Power Supply

1. Important Safety Instructions

Please comply with all warnings and operating instructions in this manual strictly. Save this manual properly 

and read carefully the following instructions before installing the unit. Do not operate this unit before reading 

through all safety information and operating instructions carefully.

•  Do not try to repair the unit yourself, contact your local supplier or your warranty will be void. 

•  To eliminate any overheating of the Transformer box, keep all ventilation openings free from obstruction and 

do not place any foreign objects on top of the Transformer box. Keep the Transformer box 20 cm away from 

the wall. 

•  Do not install the Transformer box under direct sunlight.  Your warranty will be void if the iso fail due to over

-

heating.

•  This Transformer box is not designed for use in dusty, corrosive and salty environment. 

•  The warranty for this Transformer box will be void if water or other liquid is spilt or poured directly onto the 

Transformer box. Similarly we do not warrant any damage to the Transformer box if foreign objects are delib

-

erately or accidentally inserted into the Transformer box enclosure. 

•   

Servicing of Transformer box should be performed or supervised by trained personnel with knowledge of 

Transformer box and the required precautions. 

Operating environment

 

Temperature

Storage

-15°C ~ 45°C

Maximum altitude

Operation

1,000  meters 

Storage

15,000 meters (50000 feet)

Humidity

Relative Humidity

• 

Make sure the Transformer box is installed within the proper environment as specified. 

Summary of Contents for XPD-IT10KW











Reviews: