Xtreme Power Conversion Corporation
Web/SNMP Cards
Page 76
UPS Management
succeeded.
- If entered wrong account and password, the server will response with 530 Not Logged in to indicate
Login failed.
• Operation commands as followings:
This command is to request server to list up all the file and sub file under current Menu.
User may finds out the firmware version of the NetAgent UPS of its IP.
-put<client’s file route>: This command is to ask the client to copy its specific file route to the Server
point. User may use this method to upload the latest firmware to the remote NetAgent
-quit: This command is to allow the user to logout with the current username account as well
as close the connection of FTP.
For example: The picture below is to upload the latest NetAgent firmware file (c:\ work\netagent\prjs\
nag\2.32.DK520.bin ) which is in this computer to the NetAgent UPS with IP address of 192.168.50.179
3. Use IE browser to update (suitable for BK,CK,DK,BP,CP,DP version)
This method is to enter the account, password and IP address of the NetAgent UPS which the user wish to
update under the website column. Once entered, user may see the current firmware
version, and then please copy the latest firmware to here to complete the updating process.
Two method of entering:
• ftp://admin:[email protected]
Again, the password here is the one been set at Netility, if did not set anything before, then enter NetA-
gent’s default value as:
Account: admin
Neglect password (ftp://admin:@192.168.50.179)
• ftp://192.168.50.179/
, when using this method to enter, the follow error message will be show. At this
moment, select “Enter Identity” at the top left corner of file menu. Then enter admin as account name and
password to re-enter again.
