Xtreme Power Conversion Corporation
P90L 1500–3000 User’s Manual
Page 17
Uninterruptible Power Supply
UPS Input Connection
Connect the UPS to an approved electrical input source consistent with the input power cord connection provided
with the UPS. Do not replace the power cord or use a substitute. Avoid using extension cords when connecting AC
input to any UPS.
UPS Output
There are two types of output on the P90L-1500, P90L-2000, and P90L-3000 models - programmable outlets and
general outlets. Please connect non-critical devices to the programmable outlets and critical devices to the general
outlets. During power failure, you may extend the backup time to critical devices by setting shorter backup time
for non-critical devices.
Programmable outlets can also be used to re-cycle the power to remote devices if required to re-start a server due
to lock-up issues.
Starting the UPS
Press the ON/MUTE button on the front panel of the UPS for two seconds to power on the UPS.
Note: the battery charges during the first five hours of normal operation. Do not expect full battery run time during
the initial charge period.
Software Installation
For optimal system protection, install UPS monitoring software to fully configure UPS shutdown. Please follow
steps below to download and install monitoring software, or simply install via the included CD:
1.
Got to the website http://www.power-software-download.com
2.
Click ViewPower software icon and then choose your required Operating System to download the soft
-
ware.
3.
Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon located in the
system tray near the clock.
