Xtreme G90 User Manual Download

Page: 2 / 54

Xtreme Power Conversion Corporation

G90 User’s Manual

Page 2

Uninterruptible Power Supply

Table of Contents

Introduction.................................................................................................7
Product Description......................................................................................7

Double Conversion Online Technology............................................................................................7

Diagnostic Tests...............................................................................................................................8

System Configuration...................................................................................8

Communication Connections.........................................................................................................10

Emergency Power Off (EPO) Port...................................................................................................11

Hardware Installation Guide.......................................................................12

Safety Information.........................................................................................................................12

Storage and Transportation...........................................................................................................12

Environment...............................................................................................13
UPS Installation..........................................................................................13

Connecting the UPS Internal Batteries...........................................................................................13

Connecting Extended Battery Packs (EBPs)...................................................................................15

Rack-mount Installation.................................................................................................................17

Tower Installation..........................................................................................................................19

UPS Input Connection....................................................................................................................21

UPS Output Connection.................................................................................................................21

Starting the UPS............................................................................................................................ 21

Operations.................................................................................................23

Front Panel Control Functions.......................................................................................................23

Indicator Descriptions....................................................................................................................23

Button Descriptions.......................................................................................................................24

Working Status of Indicators..........................................................................................................24

Display Functions...........................................................................................................................25

Parameters Inquiring.....................................................................................................................27

User Settings..................................................................................................................................29

Operating Mode Description.......................................................................33

Summary of Contents for G90






















































Search results

Summary of Contents for G90

Reviews:

Related manuals for G90

Brands by name

Popular brands

Xtreme G90, User Manual

Search results

Summary of Contents for G90

Reviews:

Related manuals for G90

Brands by name

Popular brands